Guide
How to run a truck cycle time study
A truck can lose more time waiting at the face than it spends driving. The only way to see it is to time each step of the truck's visit to the loading point, truck by truck. Here is a method that works from a safe spot beside the face.
1. Define the steps before you time anything
Agree on the start and stop of each step so every observer cuts the visit in the same place.
| Step | Starts when | Stops when |
|---|---|---|
| Queue | Truck arrives and has to wait | Truck is called into the spot |
| Truck in spot | Truck starts to reverse in | Truck is in the spotting position |
| Truck in position | Truck stops, ready to load | Loader is ready to dump |
| Loading (passes) | First bucket over the body | Final pass discharged |
| Truck exit | Final pass is done | Truck pulls away |
Total time at the loading point is the sum of these steps. Anything beyond that, such as a stop on the haul road, is a delay and should be tagged as one.
2. Choose a safe observation spot
Stand where you can see the truck, the spot and the loader at the same time, outside the swing radius and the haul road, and follow the site's safety rules. Never trade a safe position for a better view.
3. Record the delays as they happen
Do not discard slow visits. Tag them: no loader available, wrong spot, dispatch hold, a blast hold, a haul delay. You can then report the clean loading time and the waiting time separately, which is the only fair way to compare trucks and crews.
4. Know how many trucks you need
The sample size depends on how variable the visits are, using the same formula as for a loader study.
where s is the standard deviation of your sample, x̄ the mean, r the accuracy you accept (0.05 is 5%) and t about 2 for 95% confidence. Time trucks across shifts and haul distances, not only the quiet hour.
5. Common mistakes
- Timing only loaded visits. Queue and spotting are where trucks lose time.
- Mixing truck types. Time each truck class separately; payload and passes differ.
- Forgetting the exit. The visit ends when the truck leaves, not when the last bucket lands.
- Studying too little. A few trucks on one afternoon will mislead you.
6. Turn the numbers into action
Compare queue time with spot time and loading time. A long queue points to too many trucks for the loader, a long spot time points to a cramped or badly marked loading point, and a long loading time points to the loader or the dig. Pair this with the match factor and the queue time, and time the loader with the loader cycle guide.
Time your own trucks. CycleStudy Pro records loader and truck cycles offline and does this maths for you. Join the waitlist or try the free calculators.